1996-2002 Viper GTS/RT-10 Stage 2 Twin Turbo System:

System Contents:
- Twin Ball Bearing Turbos (Choice of 67, 72, or 76mm)
- 1 3/4" Stainless Steel Turbo Headers
- 2 3/4" to 3" Stepped Turbo Downpipes
- Two Tial 46mm Turbo Wastegates
- Two Tial 50mm Blow Off Valves
- Mandrel Bent High Flow Intercooler Plumbing
- Polished Stainless Steel Throttle Body Plumbing
- High Flow Front Mount Air to Air Intercooler
- "T" Style Turbo Discharge Clamps
- High Pressure Intercooler Plumbing Connectors
- Heavy Duty Engine Mounts
- Turbo Oil Feed Lines and Fittings
- Turbo Oil Drain Lines and Fittings
- Two Stage Adjustable Boost Controller
- High Temperature Silicone Wastegate Control Lines
- All Necessary Vacuum Tees and Hoses
- High Flow Turbo Inlet Plumbing
- Dual High Flow K&N Air Filters
- High Flow Fuel Rails
- High Flow 75 Lb.Hr. Fuel Injectors
- Upgraded Fuel Injector Conectors
- Colder Heat Range Spark Plugs
- Custom Made Aluminum Turbo Heat Shields
- Crankcase Breather Tank
- Crankcase Breather Lines and Fittings
- High Flow 1300 Hp External Fuel Pump
- High Flow External Fuel Filter
- Adjustable Fuel Pressure Regulator
- Underhood Fuel Pressure Gauge
- Upgraded Fuel Feed and Return Lines
- Rubber Fuel Pump Mounts For Quiet Operation
- Aluminum Fuel Fittings
- Fuel Pump Relay and Wiring
- Engine Oil
- Engine Oil Filter
- Antifreeze
- Professional Installation and Chassis Dyno Tuning
- AEM Engine Management System
- One Year Warranty

Engine Work:
- 510 Cubic Inch Stroker Engine
- Custom Forged Aluminum Dished 8.5:1 Compression Pistons
- Heavy Duty Wrist Pins
- Childs & Albert High Performance Piston Rings
- Clevite "H" Series Connecting Rod Bearings
- MOPAR Main Bearings
- 6.200" Billet Steel Connecting Rods
- Offset Grinding and Polishing of Crankshaft
- Line Hone Inspected and Machined as Necessary
- Balancing of Rotating Assembly
- Boring and Honing of Engine Block
- Custom Ground Hydraulic Roller Camshaft
- High Performance Hydraulic Roller Lifters
- Ported Cylinder Head Upgrade
- Ported and Polished Intake and Exhaust Runners
- Polished Combustion Chambers
- Bronze Valve Guides
- Teflon Valve Seals
- Three Angle Competition Valve Job
- Heavy Duty Valve Springs
- Titanium Valve Retainers
- 2.02" Stainless Steel Intake Valves
- 1.60" Stainless Steel Exhaust Valves
- T&D 1.7 Ratio Shaft Mounted Roller Rockers
- High Performance .080" Thick Chromoly Pushrods
- Professional Inspection and Assembly of Engine
- One Year Warranty